Electricity Multi Channel Car DVR / Automatic Vehicle Mobile DVR 75Ω

Multi Channel Car DVR Description

• Power Led, electricity, light, when the system is in standby state, the power indicator lights flashing;

Status Led, electricity, light, when the system is recording, the power indicator lights flashing. This product

is the normal input voltage is 12V/24V.

(2) trigger line and manual keys can select the image in any way 4-way camera

(3)In Trigger state, hand the keys effectively. When you press the manual key "Quad" of orbutton,

the trigger is invalid, Undo "QUAD" trigger to be effective

(4) After triggering undo, image delay three seconds, and enters the standby state.

(5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line

corresponding channel full-screen image,only three seconds, and then jumps automatically split image screen.

(6) can connect up to four cameras, and automatically split video screen

(7) car camera powered by the device for easy wiring

(8) DVD navigation screen display is triggered by the "red line" switching equipment, wiring and display convenience

(9) Each image can be set to forward / mirroring respectively; RCA connectors can be configured to connect DVD

Technical parameters

★On-off system and Manual mode introduced:

1. Short press or long press (more than 1 second) SMT button boot, showing automatic segmentation of images,again, a short press or for a long time to press the SMT button to shutdown, the system enters standby mode, but the system still in the recording.

2. long press the SMT button to boot, short press button to switch image mode.

★ Host box with high integration technology, four cameras centralized power supply box by the host, thereby greatly reducing the tedious wiring during installation, in addition to four cameras captured the image signal after the hosts converted by a video cable and the navigation DVD of "AV" port connection

Wiring Diagram Installation

<DIP switch>

★ mirror DIP switch: 4 switches, achieve about Mirror: dial-up ON, mirroring; OFF Just dial down. As default.

★ Parking DIP switch: a switch (fifth), to dial ON, system startup power loss protection, voltage is not enough, the system automatically dial down dormancy; OFF, power loss protection cancel.

To achieve parking video surveillance, proposed to ON state.

Four-core trigger line description

Four-wire:

Line 1 (Green) is a front view of the trigger line, you can access the Front

Office assist lamp or other neutral switch,When triggered,

the system boot, revoked, the system standby

Line 2 (white) left, as the trigger line, then turn left at light positive

(when the electric pen test twinkling).When the trigger,

automatic full screen display,

Line 3 (yellow) to reverse the trigger line, then reversing light positive,

When triggered, the system boot, when withdrawn,

system standby,

Line 4 (blue) to the right, as the trigger lines (sparking when electric

pen test) then turn right at lights positive,When triggered,

automatic full screen

Frequently Asked Questions

Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work, automatic image display screen (the default screen is H), long press again, the device enters the standby state; (Note: Press 1 second, the device starts, but Car navigation display screen response time takes about 1 second.)
Short press (less than 1 second), single-screen and "field" screen to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the next depending on the assist lamp or other neutral switch place; the 2nd line (white) left, as the trigger line, then turn left positive light; the 3rd line (yellow) to reversing trigger line, then reversing light positive; Line 4 (blue) to the right, as the trigger line, then turn right at lights positive
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen, reverse video input port, the red line equipment output port connected to the reversing vehicle navigation screen test line, some car navigation screen video input is automatically detected, so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if yes, then the device into standby mode, the output is off, press the power switch on the remote control or press the patch trigger switch device is turned on, POWER light long bright, video output device.
Question 5: Why dial left or right turn lamp lights, equipment no image?
A: The equipment in standby mode, dial left or right turn lamp lights, is not shown, because the normal driving, the driver will often toggle turn signal, if activated every time the screen display, it will affect the driver's driving safety a. If you intend to observe the situation around, press and touch switch or remote control to open the key.
Question 6: about the camera connected to where?
A: The camera can be connected at the bottom of the rearview mirror, you can monitor the front direction, because the left and right front wheels are usually dead, rear wheel rearview mirror, the normal camera monitoring is not required.
Q 7: power input line device connected to where?
A: Red power cable ACC (ie car ignition point), black ground (or Ground). As signs Parking REC, red power cable can be connected to the car battery positive (Note: the 5th DIP switch to the top).

NOTE: Power Led, when energized, the lights lit; when the system enters standby mode, the power light flashes. Status status lights, video flashes, when not recording continuously. This product is the normal input voltage 9V ~ 36V (the parking monitor is 12.5V ~ 36V).

Our Company: Shenzhen Sunta Technology Co., Ltd. (hereinafter referred to as SUNTA), is a Leading professional manufacturer Of CCTV DVR NVR and Vehicle Mobile DVR etc. security and surveillance products in China,Specializing In R&D, production, sales and service of Mobile DVR/MDVR, car driving recorder, car/vehicle cameras and network hard disk recorders, VDR(Video Disk Recorder),Color multiplexer,HDMI Splitter and screen segmentation systems.

Our Company Invests Large Fund And Brains To Research Products To Fit The Demand Of The Market. High Level Research Group, Advanced Apparatus And Good Scientific Atmosphere Ensure The Stable And Reliable Quality, Most Of Our Products Conform To The Requirements Of FCC, CE,ROHS. It Is Mainly Sold To Bus public transportation fleet management company and those vehicle surveillance distributors In Abroad, Such as USA,Canada,Uk,Brazil,Germany, Russia,Australia,Greece,Netherlands, Ireland ,Austria, Iran ,Turkey,Sweden, Rumania,Bulgaria,Poland, And So On.

Company's existing registered trademark, "LUHOOVISION" SUNTA etc. Company production of mobile dvr is widely used in medium and high-grade car, sedan car,Bus,truck, oil tank and farm machinery. Due to strict quality management and good reputation, our products have been sold to southeast Asia, Africa, the Middle East, America and Europe and other countries and regions.

Shenzhen Sunta’s products have been widely used in various vehicle security and surveillance industries, including vehicle monitoring, fleet management, Driving recording,parking monitoring etc., enjoying a good reputation among customers both in the overseas and domestic market.

Shenzhen Sunta Technology Co., Ltd. established in 2007,is a rapid growing enterprise who integrate the production and marketing of CCTV Mobile DVR etc. security and surveillance products. After ten years' effort and development, now we have become one of the leading Car Mobile DVR manufacturers and supplies in China. We are always keeping very kind relationship with many strong Chip factories and research institutes in China, we have been enjoying high reputation in CCTV Mobile DVR market domestically and internationally.

SUNTA's mission is: "The manufacture depends on reducible cost,Competition relies on high quality. " and our tenet is "hold integrity, forge ahead, serve the world." we are always trying our best to offer the best services and the most competitive prices with high quality goods for our customer, it's the way we win our customers and the market.

We also has bridle-wise manage team ,design team and QC team ,and can supply customer their desired sample in the earliest date, arrange your order correctly, strictly control the mass production quality and lead time , and let the business goes smoothly !

Shenzhen Sunta Technology Co. LTD have many patents now; all of our mobile dvr have passed FCC, CE, ROHS and other international authoritative certifications. What’s more, our products are popular for its light weight, mini size, portable and easy to install. In addition, its installing structure is suitable for fast assemble and disassemble (one sixth time of other company’s products). After years of R & D work, our products have become the leader in CCTV vehicle security and surveillance field.

In the process of production and before shipment, every one of our products are very strict professional testing to ensure the optimal quality of the product. In addition, the company also has strong R&D Team is dedicated to the r&d and production of DVR program, this is not only good for our quality control from raw material, and good for our control of the whole production cost, in order to increase the company's products in the market competition advantage.

Productivity
Now our main single product the Daily Production is 80,000 pcs. We are one of the pioneer domestic enterprises who successfully Research, Develop and produce CCTV color quad processor, mobile DVR,Car dvr,vehicle cameras,LCD monitors,car rear mirror dvr etc......We have achieved many intellectual property.